Vendor: iWave Systems Technologies Pvt. Ltd. Category: Video Transport

ARINC 818-2 IP Core

iWave's ARINC IP core is ARINC 818–compliant, which can be implemented on any transceiver based FPGA.

Contact Provider Request Datasheet

Overview

iWave's ARINC IP core is ARINC 818–compliant, which can be implemented on any transceiver based FPGA. It can be used for both transmit-and-receive applications. This core has flexible user interface, allowing for various video parameter configuration. This IP core supports Line Synchronous Mode.

Key features

  • Streaming Interface used as Video TX and RX interface.
  • Video Input Format Supported.
    • Resolution depends on the FPGA transceiver speed used for implementation
    • For SXGA (1280x1024@60Hz) resolution, required data rate is 2.5Gbps
  • Pixel Format supported.
    • Monochrome
    • RGB
    • YcbCr
    • RGBA
  • Pixel Aspect ratio supported.
    • 1:1
    • 1:1.2
    • 1.2:1
    • NTSC (approx 8:9)
    • PAL (16:15)
  • Frame Rate supported.
    • 15fps
    • 20fps
    • 24
    • 24 * 1000 / 1001
    • 25 (PAL)
    • 30
    • 30 * 1000 / 1001 (29.97 NTSC)
    • 60
    • 50
    • 60 * 1000 / 1001 (59.94 NTSC)
    • 50 (VESA DMT)
    • 60 (VESA DMT)
    • 75 (VESA DMT)
    • 85 (VESA DMT)
    • 50 (VESA CVT)
    • 60 (VESA CVT)
    • 75 (VESA CVT)
    • 85 (VESA CVT)
  • Pixel Table Number supported
    • 8-bit Components, four components per transmission word
  • Pixel Array Order supported
    • Left to Right, Top to Bottom
  • Line Synchronous Mode supported
  • 32-bit Full Image CRC supported
  • Following are user configurable parameters
    • No. Of rows
    • No.of Columns
    • Video Format Code
    • Pixel Aspect Ratioe
    • Video Frame rate
    • Color Information Code

Block Diagram

ARINC 818-2 IP Core block diagram

Benefits

  • Design consists streaming interface and hence it can be used for high throughput video transfer.

Applications

  • Video and image processing in Aerospace applications.

Specifications

Identity

Part Number
ARINC 818-2 IP Core
Vendor
iWave Systems Technologies Pvt. Ltd.
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

Contact iWave Systems Technologies Pvt. Ltd.

Learn more about Video Transport IP core

Enabling High Performance SoCs Through Multi-Die Re-use

This paper gives a high-level overview of a technique for rapid design of new IC designs using multiple dice packaged in a variety of aggregations allowing for differnent performance levels and price points to be achieved. The technique relies on a new high-bandwidth low pin-count communication channel between two or more dice.

An HDTV SoC Based on a Mixed Circuit-Switched / NoC Interconnect Architecture (STBus/VSTNoC)

This paper presents the interconnect solution adopted for an HDTV SoC developed in HVD division of STM. The SoC is a one-chip satellite HDTV set-top box IC developed in 65nm technology. The interconnect of this HDTV SoC is the first in STM implementing a mixed archi­tecture based on the circuit-switched interconnect named STBus and the new NoC interconnect named VSTNoC.

Frequently asked questions about Video Transport IP cores

What is ARINC 818-2 IP Core?

ARINC 818-2 IP Core is a Video Transport IP core from iWave Systems Technologies Pvt. Ltd. listed on Semi IP Hub.

How should engineers evaluate this Video Transport?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Video Transport IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP