3.3V 100MHz Oscillator I/O Pad Set

The 3.3V 100MHz Oscillators library includes a programmable oscillator macro I/O cell.

100 MHz programmable oscillator

These libraries are offered at both 16nm and a 12nm shrink. They
are available in a staggered CUP wire bond implementation with a flip chip option.

To utilize these cells in the pad ring, an additional library is required – 3.3V Support: Power. That library contains the DVDD/DVSS power cells necessary for ESD protection, the POC and VREF cells, and a rail splitter to isolate the oscillator in its own power domain as recommended. It also contains an input-only buffer, isolated analog I/O, and a full complement of power cells along with corner and spacer cells to assemble a complete pad ring by abutment. The rail splitter allows multiple power domains to be isolated in the same pad ring while maintaining continuous VDD/VSS for robust ESD protection.

• 100 MHz Programmable Oscillator Features
• Programmable drive strength for wider frequency range – 1 MHz to 100 MHz using industry standard external crystals.
• Optimized for stability and minimum jitter
• Power-down mode
• Operates on core power only (VDD/VSS cells embedded)
• Vertical-only (_V) and and horizontal-only (_H) variants provided.

• a. Physical abstract in LEF format (.lef)
• b. Timing models in Synopsys Liberty formats (.lib and .db)
• c. Calibre compatible LVS netlist in CDL format (.cdl)
• d. GDSII stream (.gds)
• e. Behavioral Verilog (.v)
• f. Layout Parasitic Extraction (LPE) SPICE netlist (.spice)
• g. Databook (.pdf)
• h. Library User Guide - ESD Guidelines (.pdf)