Bluetooth IP Cores for GlobalFoundries

Bluetooth IP cores enable wireless short-range communication in modern SoC and ASIC designs, supporting applications such as IoT devices, wearables, audio systems, and automotive connectivity.

These IP cores typically implement Bluetooth Low Energy (BLE) and/or Bluetooth Classic protocols, providing efficient, low-power connectivity for data exchange between devices.

This catalog allows you to compare Bluetooth IP cores from leading vendors based on power consumption, data rate, protocol support, and process node compatibility.

Whether you are designing a smart wearable, an audio device, or an industrial IoT system, you can identify the right Bluetooth IP for your connectivity requirements.

 
All Bluetooth offers for GlobalFoundries
Clear

Compare 4 Bluetooth IP Cores for GlobalFoundries from 3 vendors

What is a Bluetooth IP core?

A Bluetooth IP core is a reusable hardware block that implements Bluetooth wireless communication protocols in SoCs and ASICs. It enables short-range data exchange between devices using standardized Bluetooth technologies.

Bluetooth IP cores typically include baseband processing, protocol stack support, and integration with RF front-end components.

Main types of Bluetooth IP

Bluetooth Low Energy (BLE) IP

BLE IP is optimized for ultra-low power consumption and is widely used in IoT devices, wearables, and healthcare applications. It supports efficient communication for sensors and battery-powered devices.

Bluetooth Classic IP

Bluetooth Classic is used for higher data rate applications such as audio streaming, headsets, and consumer electronics.

Dual-mode Bluetooth IP

Dual-mode IP supports both BLE and Classic Bluetooth, enabling flexibility for devices that require both low-power and high-throughput communication.

Key features of Bluetooth IP cores

  • Low power consumption for battery-operated devices
  • Support for Bluetooth standards (BLE, Classic, latest specifications)
  • Secure communication and encryption support
  • Integration with RF front-end
  • Compliance with Bluetooth SIG specifications

How to choose a Bluetooth IP core

Selecting the right Bluetooth IP depends on your application and system constraints:

  • Required protocol (BLE, Classic, or dual-mode)
  • Power consumption and battery life targets
  • Data rate and latency requirements
  • Security features
  • Process node compatibility and integration complexity

Applications of Bluetooth IP cores

  • Wearables (smartwatches, fitness trackers)
  • Audio devices (headphones, speakers)
  • Smart home and IoT
  • Automotive connectivity
  • Industrial wireless systems

Compare Bluetooth IP cores from leading vendors

This catalog provides access to a wide range of Bluetooth IP cores from leading semiconductor IP providers.

Use filters to compare solutions based on power efficiency, protocol support, performance, and integration requirements to find the best Bluetooth IP for your design.

Frequently asked questions about Bluetooth IP cores

What is a Bluetooth IP core?

A Bluetooth IP core is a hardware block that enables wireless communication using Bluetooth protocols in SoCs and ASICs.

What is the difference between BLE and Bluetooth Classic?

BLE is optimized for low power consumption and short data bursts, while Bluetooth Classic supports higher data rates for applications such as audio streaming.

What is dual-mode Bluetooth?

Dual-mode Bluetooth IP supports both BLE and Classic, allowing devices to handle multiple types of wireless communication.

Where are Bluetooth IP cores used?

They are used in wearables, audio devices, IoT systems, automotive connectivity, and industrial applications.

How do I choose a Bluetooth IP core?

You should consider protocol support, power consumption, data rate, security features, and integration requirements.

×
Semiconductor IP