SDIO Controller IP
Welcome to the ultimate SDIO Controller IP hub! Explore our vast directory of SDIO Controller IP
All offers in
SDIO Controller IP
Filter
Compare
24
SDIO Controller IP
from 10 vendors
(1
-
10)
-
SD 3.0 / SDIO 3.0 / eMMC 5.0 Host Controller
- Memory Card / Form Factors:
- IP Details:
-
SD 4.1 SDIO 4.1 Host Controller IP
- SD4.0
- SDIO4.0
- eMMC5.0
-
SD 3.0 / SDIO 3.0 Combo Device Controller
- Meets SD Memory Card Physical Layer Specification version 3.0
- Meets SDIO card specification ver 3.0
- Host clock rate variable between 0 and 208 MHz
- All SD bus modes supported including SPI, 1 and 4 bit SD.
-
SDIO 3.0 Device Controller
- Compliant with SD Specification Part E1 SDIO 3.0.
- High-performance cards - UHS-I (832 Mbps).
- Optional Multiple I/O functions and one Memory supported.
- Asyncrhonous interrupt to Host controller.
-
SDIO UHS II Verification IP
- Supports SD specification UHS-II Adddendum version 2.00 compliant.
- Supports Part E1 SDIO specification version 4.10.
- Supports SD specification physical layer version 4.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft).
- Supports bi-directional receiver/transmitter (2ch) supporting both Full Duplex and Half Duplex modes.
-
SDIO 8.0 Verification IP
- SDIO Specification 1.0/2.0/3.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft) compliant.
- Supports SDIO, SD Memory, SD Combo card and Multi-media cards.
- Easily configurable to work as SDIO aware or non-SDIO aware Host controller.
- Card detection on DAT [3] line in SD mode and CS line in SPI mode.
-
SDIO 8.0 Synthesizable Transactor
- SDIO Specification 1.0/2.0/3.0/4.20/5.0/5.10/6.0/6.10/7.0/7.10/8.0(Draft) compliant.
- Supports SDIO, SD Memory, SD Combo card and Multi-media cards.
- Easily configurable to work as SDIO aware or non-SDIO aware Host controller.
- Card detection on DAT [3] line in SD mode and CS line in SPI mode.
-
SDIO Host Controller IIP
- Compliant with SD Host Controller Specification version 4.0
- Compliant with Part E1 SDIO specification 4.10
- Supports SDMA, ADMA2 and ADMA3 modes
- Supports 1-bit, 4-bit bus mode and SPI Bus mode
-
SDIO Device Controller IIP
- Compliant with Part 1 Physical Layer Specification Version 3.01 and earlier versions
- Compliant with Part E1 SD Specification version 3.00 and earlier versions
- Supports all commands/response types
- Supports 1-bit, 4-bit ,8 bit SD bus mode and SPI Bus mode
-
SD Card Verification IP
- Compatible with all the versions V1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 6.10, 7.00
- Supports all Capacity of Memory i.e.
- Standard Capacity SD Memory Card (SDSC)
- High Capacity SD Memory Card (SDHC)
