Flash Memory IP

Compare 42 Flash Memory IP from 10 vendors (1 - 10)

Embedded CMOS Flash memory IP with sector/chip Erase and byte Program capability
- SuperFlash technology
- CMOS compatible
- Up to 500K cycle endurance
Compact Flash Verification IP
- Supports Compact Flash Specs 1.0/2.0/3.0 and 4.0.
- Supports all the 3 basic modes of CF Card,
- PC Card ATA using I/O Mode.
- PC Card ATA using Memory Mode.
memBrain™ Tile
- Multiplication happens through cell operation characteristics
- Summation happens along the word or bit line depending on configuration
- Multiple "Tiles" can be connected to support a large neural system
External Flash Memory Interface IP
- AXI4-Lite standard user interface. Connects as a 32-bit slave on AXI interface
- Page-wise programming according to the flash memory requirements handled by the IP
- Memory single bit error detection and correction implemented in the IP-core.
- User configurable, industry standard NOR flash memories can be interfaced with the IP on SPI and Quad-SPI interfaces.
Next Generation Flash device enabling small size, low power and direct connection with digital circuit which opens up new possibiities
- small size
- low power
- direct connection with digital circuit
Embedded flash IP, 1.32V/3V 90nm
Embedded flash IP, 1.5V/5V 130nm
- G1 is cost effective embedded flash IP to support from medium density to 100KBytes
Embedded flash IP, 1.5V/5V 130BCD Plus
- Achieves data retention of 10 years @ 125 degree C ~ 150 degree C, after 10K P/E cycling.
55nmHV MTP Non Volatile Memory for Standard CMOS Logic Process
- 1K-Time Programmable (MTP)
- > 10 years retention
- Uses standard CMOS process with no additional masks
MTP Non Volatile Memory for TSMC 180nm BCD Process
- High-Reliability for Automotive Applications
- 10K-Time Programmable (MTP)
- > 10 years retention