SGC22300_01_GF_22FDSOI is a Real Time Clock (RTC) based on the leading SGC21510 solution. Using advanced analog design techniques, to guarantee ultra-low power and ultra-low leakage, it was designed to be the brain of the Power Management Unit (PMU). Controlling the state of each regulator of the PMU, it defines if the regulators are in high, low, ultra-low or adaptive ultra-low power mode. Additionally, it includes anti-temper mechanisms, wake, reset or shutdown causes, that can be masked, allowing also to configure the effect of a reset. Being specified from TJ = −40°C to 125°C, it also includes ultra-low leakage configuration registers to allow the system architect to save the status bits.
RTC AND PMU CONTROLLER
Overview
Key Features
- Nano power Real Time Clock (RTC) with 32kHz oscillator
- PMU control: individual regulators enable / disable
- control in high / low / ultra-low / adaptive ultra-low power
- Ultra-low power adaptive mode (Ludicrous)
- Configurable supply domains isolation support
- Configurable reset and shutdown causes
- Anti-temper mechanisms
- Different wake sources
- 48-bit time counter, 32-bit general-purpose register
- and 2 alarms
- Ultra-low leakage design
- Fast start-up time
Technical Specifications
Related IPs
- Master and Slave SPI Bus Controller
- Universal Multi-port Memory Controller for RLDRAM2/3, DDR5/4/3, DDR4 3DS and LPDDR3/2 and LPDDR3/2
- Universal Multi-port Memory Controller for RLDRAM2/3, DDR4/3, DDR4 3DS and LPDDR3/2 and LPDDR3/2
- AHB Octal SPI Controller with PSRAM and XIP Support
- HDMI2.1/2.0/1.4 TX and RX PHY & Controller
- VBO TX and RX PHY & Controller