Vendor: SmartDV Technologies Category: LIN

LIN Controller IIP

LIN interface provides full support for the LIN synchronous serial interface, compatible with LIN 2.2A specification.

Contact Provider Request Datasheet

Overview

LIN interface provides full support for the LIN synchronous serial interface, compatible with LIN 2.2A specification. Through its LIN compatibility, it provides a simple interface to a wide range of low-cost devices. LIN IIP is proven in FPGA environment. The host interface of the LIN can be simple interface or can be AMBA APB, AMBA AHB, AMBA AXI, VCI, OCP, Avalon, PLB, Tilelink, Wishbone or Custom protocol.

LIN Controller IIP is supported natively in Verilog and VHDL

Key features

  • Compliant with 2.2A LIN Specification
  • Full LIN transmit and receive functionality
  • Supports configurable master or slave functionality
  • Supports all frame types
    • Unconditional frames
    • Event-triggered frames
    • Sporadic frames
    • Diagnostic frames
  • Supports programmable data rate between 1 kbps and 20 kbps
  • Supports programmable clock frequency up to 10 MHz
  • Supports 8-bit host controller interface
  • Supports cluster wake up and go to sleep command
  • Supports LIN status management
  • Self-synchronization in slave nodes without quartz or ceramic resonators
  • Low cost single-wire implementation
  • Fully synthesizable
  • Static synchronous design
  • Positive edge clocking and no internal tri-states
  • Scan test ready
  • Simple interface allows easy connection to Microprocessor/Microcontroller devices

Block Diagram

LIN Controller IIP block diagram

Benefits

  • Single Site license option is provided to companies designing in a single site.
  • Multi Sites license option is provided to companies designing in multiple sites.
  • Single Design license allows implementation of the IP Core in a single FPGA bitstream and ASIC.
  • Unlimited Designs, license allows implementation of the IP Core in unlimited number of FPGA bitstreams and ASIC designs.

What’s Included?

  • The LIN interface is available in Source and netlist products.
  • The Source product is delivered in verilog. If needed VHDL, SystemC code can also be provided.
  • Easy to use Verilog Test Environment with Verilog Testcases.
  • Lint, CDC, Synthesis, Simulation Scripts with waiver files.
  • IP-XACT RDL generated address map.
  • Firmware code and Linux driver package.
  • Documentation contains User's Guide and Release notes.

Specifications

Identity

Part Number
LIN Controller IIP
Vendor
SmartDV Technologies
Type
Silicon IP

Files

Product Sheet Download

Note: some files may require an NDA depending on provider policy.

Provider

SmartDV Technologies
HQ: India
At SmartDV Technologies™, we believe there’s a better way to approach semiconductor intellectual property (IP) for integrated circuits. We’ve been focused exclusively on IP since 2007—so whether you’re sourcing standards-based design IP for your next SoC, ASIC, or FPGA, or seeking verification solutions (VIP) to put your chip design through its paces, you’ll find SmartDV’s IP straightforward to integrate. By combining proprietary SmartCompiler™ technology with the knowledge of hundreds of expert engineers, SmartDV can customize IP to meet your unique design objectives: quickly, economically, and reliably. Don’t allow other suppliers to force onesize-fits-all cores into your chip design. Get the IP you need, tailored to your specifications, with SmartDV: IP Your Way.
Contact SmartDV Technologies

Learn more about LIN IP core

Understanding the LIN PHY (physical) layer

The physical layer of the Local Interconnection Network is a key part of this automotive networking standard; it has unique attributes of which designers should be aware.

VitaLLM: A Versatile and Tiny Accelerator for Mixed-Precision LLM Inference on Edge Devices

The authors present VitaLLM, a mixed-precision accelerator that enables ternary-weight large language models to run efficiently on edge devices. The design combines two compute cores—a multiplier-free TINT core for ternary–INT projections and a BoothFlex core that reuses a radix-4 Booth datapath for both INT8×INT8 attention and ternary–INT—sustaining utilization without duplicating arrays

GenAI for Systems: Recurring Challenges and Design Principles from Software to Silicon

Generative AI is reshaping how computing systems are designed, optimized, and built, yet research remains fragmented across software, architecture, and chip design communities. This paper takes a cross-stack perspective, examining how generative models are being applied from code generation and distributed runtimes through hardware design space exploration to RTL synthesis, physical layout, and verification.

ChipBench: A Next-Step Benchmark for Evaluating LLM Performance in AI-Aided Chip Design

While Large Language Models (LLMs) show significant potential in hardware engineering, current benchmarks suffer from saturation and limited task diversity, failing to reflect LLMs’ performance in real industrial workflows. To address this gap, the authors propose a comprehensive benchmark for AI-aided chip design that rigorously evaluates LLMs across three critical tasks: Verilog generation, debugging, and reference model generation.

Frequently asked questions about LIN IP cores

What is LIN Controller IIP?

LIN Controller IIP is a LIN IP core from SmartDV Technologies listed on Semi IP Hub.

How should engineers evaluate this LIN?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this LIN IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP