Vendor: RFIC Solutions, Inc. Category: RF Front End

Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications

RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application.

Contact Provider Request Datasheet

Overview

RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with on-chip DC blocking capacitors. The device is specifically designed to use in point-to-point radios for 5G RF Transceiver & SATCOM. The technology used to design front-end module is 0.1um GaAs pHEMT process. Results are shown in datasheet with all parasitics & coupling effects at desired frequency.

Key features

  • RF Frequency: 24-30 GHz
  • TX Gain of 12.7 dB
  • RX Gain of 20 dB
  • TX Output P1dB of 17.9 dBm
  • RX Output P1dB of 15.9 dBm
  • Noise Figure of 3 dB
  • Bias: VDD=4V, VGG= - 0.5V, ID= 261mA
  • Die size: 1.5 mm x 2.5 mm

Block Diagram

RFFEM01C block diagram

Benefits

  • High power and gain
  • Flat gain over band
  • Low noise figure
  • 50 ohm input and output match
  • Low cost
  • Porting: IP can be ported to 65nm Si / CMOS node

Applications

  • 5G mobile system
  • 5G Wireless Base Stations and Terminals
  • Satellite Communication
  • Point to point communication system

What’s Included?

  • Schematic and Netlist
  • Abstract Model (.lib file)
  • Layout View (Optional)
  • Behavioral Model (Circuit & EM Simulation)
  • Extracted View (Optional)
  • GDSII
  • DRC, LVS, Antenna report
  • Test bench with saved configuration (Optional)
  • Documentation

Specifications

Identity

Part Number
RFFEM01C
Vendor
RFIC Solutions, Inc.
Type
Silicon IP

Provider

RFIC Solutions, Inc.
HQ: United States
RFIC Solutions, Inc. is a fabless semiconductor company focused exclusively on wireless Solutions. RFIC Solutions Inc. offer RFIC, Analog, Digital & Mixed signal IC design services. RF Modules/Board design Services & FPGA design & development services are also provided. RFIC Solutions designs highly integrated system on chip (SOC) and system on a package (SOP); custom ICs, MIC for any wireless systems including cellular, Wi-Fi, WLAN, WiMax and UWB systems. We have designed more than 600 RFICs covering frequency range from 0.01 to 100 GHz. We have expertise in designing LNA, PA, VCO, PLL, complete Transceiver IC, ADC, Mixers, SPDT/DPDT switches at high frequency, 6Bit Attenuator, Complex Band Pass Filter, Op-Amp, PGA, VGA, Prescaler for applications ranging from DC to 40 GHz. These designs are available on SiGe BiCMOS, Si CMOS InGaP, RFCMOS, GaAs pHEMT, technologies provided by our foundry partners Tower Jazz semiconductor, GCS, TSMC, Triquint, Globalfoundries, IBM, Win semiconductors.
Contact RFIC Solutions, Inc.

Learn more about RF Front End IP core

Is there a "one-size fits all" SOC PLL?

Like most types of circuits, there is no such thing as a "one size fits all" PLL. This article will explore the trade-offs in PLL performance and design and look for a solution to most SOC PLL needs.

Frequently asked questions about RF Front End IP cores

What is Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications?

Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications is a RF Front End IP core from RFIC Solutions, Inc. listed on Semi IP Hub.

How should engineers evaluate this RF Front End?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this RF Front End IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP