High Data Rate Demodulator
The Zaltys High Data Rate Demodulator (HDRM-D) and the Zaltys Enhanced High Data Rate Demodulator (HDRM-D2) IP cores efficiently …
Overview
The Zaltys High Data Rate Demodulator (HDRM-D) and the Zaltys Enhanced High Data Rate Demodulator (HDRM-D2) IP cores efficiently realize the digital baseband section of a high performance modem receive path, including quasi-zero IF to baseband conversion, sample decimation, symbol timing recovery, and carrier recovery.
The Zaltys High Data Rate Demodulator (HDRM-D) IP core can demodulate BPSK, QPSK, offset-QPSK (OQPSK), 8PSK and 16QAM modulation schemes, all to a high performance level and at high symbol rates. The demodulator is highly flexible, supporting continuously variable software-selectable symbol rates of between 4.9kbaud and 40Mbaud, when operating with a fixed 100MHz system/ADC clock rate.
The Zaltys Enhanced High Data Rate Demodulator (HDRMD2) IP core can additionally demodulate 8QAM (3 shapes), 32/64QAM &16/32APSK, and contains an adaptive equaliser to reduce linear channel distortion such as multipath. It also offers the option of increased datapath resolution to help cope with elevated levels of adjacent carrier interference.
Key features
- Versatile digital demodulation engine supporting BPSK, QPSK, offset-QPSK (OQPSK), 8PSK, 8QAM* (three variants), 16QAM, 32/64QAM (HDRM-D2 core only) & 16/32APSK (HDRM-D2 core only)
- Close to theoretical performance
- Option to increase datapath resolution to help cope with elevated levels of adjacent carrier interference (HDRM-D2 core only)
- N-stage symbol rate blind adaptive equaliser option reduces linear channel distortions such as multipath (HDRM-D2 core only)
- Supports continuously variable symbol rates
- Internal filter decimates up to a factor of 4096
- Supports typical rates of 4.9kbaud to 40Mbaud with 100MHz clock (range scales linearly with clock)
- Four matched filter configurations with alphas of 20%, 25%, 35% & 40% (others available on request)
- Fast acquisition algorithm
- Combined coarse/fine frequency scan
- High probability of first pass acquisition
- Highly configurable and versatile - fully programmable via simple microprocessor interface (SMPI)
- Fully programmable dynamic operation
- Independent acquisition & track parameters
- Configurable timing & carrier lock characteristics
- 10 to 14-bit I & Q datapath/ADC interface resolution*
- Constellation output interface suitable for connecting to soft-decision forward error correction (FEC)
- AGC control interface to analogue front-end
- Status interface reports real-time demodulation state
- Comes with software driver in C
- Extensive support for software monitoring
- Suitable for FPGA or ASIC implementation
- Synchronous design with single clock
- Hardware evaluation board (available extra)
Files
Note: some files may require an NDA depending on provider policy.
Specifications
Identity
Provider
Learn more about Modulation Demodulation IP core
Three Major Inflection Points for Sourcing Bluetooth Intellectual Property
Part 2: Opening the 5G Radio Interface
An Integrated, Tunable RF Filter: an Enabler for Reconfigurable Front-Ends
Design considerations for integrated CMOS receivers
Silicon IP for Programmable Baseband Processing
Frequently asked questions about Modulation and Demodulation IP cores
What is High Data Rate Demodulator?
High Data Rate Demodulator is a Modulation Demodulation IP core from Silicon Infusion Ltd. listed on Semi IP Hub.
How should engineers evaluate this Modulation Demodulation?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Modulation Demodulation IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.