SmartCard (IEC7816) Synthesizable Transactor
SmartCard (IEC7816) Synthesizable Transactor provides a smart way to verify the SmartCard (IEC7816) component of a SOC or a ASIC …
Overview
SmartCard (IEC7816) Synthesizable Transactor provides a smart way to verify the SmartCard (IEC7816) component of a SOC or a ASIC in Emulator or FPGA platform. The SmartDV's SmartCard (IEC7816) Synthesizable Transactor is fully compliant with standard SmartCard (IEC7816) Specification and provides the following features.
Key features
- Adherent to ISO/IEC 7816-3 Specification
- Supports complete IEC7816-3 Tx/Rx functionality
- Supports complete SmartCard and SIM Card commands supported
- Supports all functions for complete smart card sessions, including
- Card activation and deactivation
- Cold/warm reset
- Answer to Reset (ATR) response reception
- Data transfers to and from the card
- Supports adjustable clock rate and bit (baud) rate
- Supports configurable automatic byte repetition
- Supports commonly used communication protocols
- T=0 for asynchronous half-duplex character transmission, and
- T=1 for asynchronous half-duplex block transmission
- Supports Sleep mode and Clock stop mode
- Supports automatic convention detection
- Supports automatic voltage class selection
- Supports configurable timing functions
- Smart card activation time
- Guard time
- Timeout timers
- Supports all three resynchronization levels for the Interface device of the transmission protocol
- Retransmission of blocks
- Use of S(RESYNCH request)
- Warm reset or deactivation
- Supports all three resynchronization levels for the Card of the transmission protocol
- Retransmission of blocks
- Use of S(RESYNCH response)
- Without action by the interface device, the card becomes unresponsive
- Supports all types of error insertion and detection
- Character parity error(s)
- Redundancy code error
- Invalid PCB
- Invalid LEN
- Loss of synchronization
- Failure to receive the relevant S(response) after having transmitted S(request)
- Supports some common SmartCard device model
- Supports both synchronous and asynchronous mode of communication
- Supports both type of CRC poly
- ISO/IEC 13239, or ISO/IEC 14443-3 type B, or ITU-T Rec. V.42
- CRC-T1 as used by many ISO/IEC 7816-3 readers
- Slave/Card BFM supports some standard SmartCard and SIM Card chips
Block Diagram
Benefits
- Compatible with testbench writing using SmartDV'S VIP
- All UVM sequences/testcases written with VIP can be reused
- Runs in every major emulators environment
- Runs in custom FPGA platforms
What’s Included?
- Synthesizable transactors
- Complete regression suite containing all the SmartCard (IEC7816) testcases
- Examples showing how to connect and usage of Synthesizable Transactor
- Detailed documentation of all DPI, class, task and functions used in verification env
- Documentation also contains User's Guide and Release notes
Specifications
Identity
Files
Note: some files may require an NDA depending on provider policy.
Provider
Learn more about Smartcard IP core
Effective Optimization of Power Management Architectures through Four standard "Interfaces for the Distribution of Power"
Future Trends in SoC Interconnect
System-on-Chip Design using Self-timed Networks-on-Chip
SoC interfaces going 'soft'
More functions require balanced SoC design
Frequently asked questions about Smartcard IP cores
What is SmartCard (IEC7816) Synthesizable Transactor?
SmartCard (IEC7816) Synthesizable Transactor is a Smartcard IP core from SmartDV Technologies listed on Semi IP Hub.
How should engineers evaluate this Smartcard?
Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Smartcard IP.
Can this semiconductor IP be compared with similar products?
Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.