Vendor: Global IP Core Sales Category: Channel Coding

NR-5G Polar Decoder and Encoder

The Forward Error Correction (FEC) sub-system is one of the essential basing blocks in any communication systems so a FEC code is…

Overview

The Forward Error Correction (FEC) sub-system is one of the essential basing blocks in any communication systems so a powerful FEC code is needed. The New Radio (NR) FEC for the control channel is proposed to be designed based on Polar codes allowing close to the Shannon limit/Capacity operation. The Polar code successive cancellation decoding process as needed for 3GPP physical layer standard. Parity Check bits simplify the pruning of the search tree. The New Radio (NR) Polar codes are defined by their generator matrices where the basic polarization transform is defined by the basic G2 matrix in section 5.3.1.2 of ETSI TS 138 212 V15.2.0 (2018-07). The encoding of the NR Polar code is performed in GF(2). The NR Polar codes are structured using the static reliabilities in Table 5.3.1.2-1 of ETSI TS 138 212 V15.2.0 (2018-07). Maximum code block length is 1024 bits and minimum is 32 bits as in section 5.3.1 of the same ETSI doc. The number of Extra parity check bits is defined in Subclause 5.3.1.2 and they are used to simplify the decoding process and reduce decoder complexity. Would be easily integrated with interleavers and Rate matching circuitry for providing all rates supported by 5G NR.

Key features

  • Successive Cancellation Decoding
    • With List Decoding
    • With Parity Check bits
  • Soft decision decoding
  • Max. Block length is 1024
  • Wide range of block lengths and data rates to be selected based on rate matching
  • Fixed reliability channels as specified by standard
  • High peak rates and low latency
  • 3GPP TS 38.212 V15.1.1 compliant
  • Easily integrated to rate matching functional units

Applications

  • 3GPP-LTE Rel. 15; eMBB control channel code
  • 5G NR air interface
  • Machine to machine communication (M2M)
  • High traffic IOT

What’s Included?

  • Synthesizable verilog
  • System Model (Matlab)
  • Verilog Test benches
  • Docmentation

Files

Note: some files may require an NDA depending on provider policy.

Specifications

Identity

Part Number
NR 5G Polar Decoder and Encoder
Vendor
Global IP Core Sales
Type
Silicon IP

Provider

Global IP Core Sales
HQ: Germany
Global IP Core Sales was founded in 2021 and provides state-of-the-art IP Cores for the Semiconductor market. The majority of our products are silicon proven and can be seamlessly implemented into FPGA and ASIC technologies. Global IP Core Sales will assist you with your IP Core and integration needs. Our mission is to grow your bottom line.

Learn more about Channel Coding IP core

Practical Considerations of LDPC Decoder Design in Communications Systems

This paper covers some practical aspects of designing the LDPC decoder starting from comparison between different techniques, different decoders parameters or standards, the effect of those parameters on the LDPC performance, also it discusses the algorithm selection process, and floating point implementation process.

Audio Transport in DisplayPort VIP

DisplayPort uses Secondary Data Packets (SDPs), which are transported over the Main-Link that are not main video stream data. This allows it to carry audio and video simultaneously. The VIP supports audio transmission both in the original mode as defined in the specification as well as just as any other SDP being transmitted.

Frequently asked questions about Channel Coding IP cores

What is NR-5G Polar Decoder and Encoder?

NR-5G Polar Decoder and Encoder is a Channel Coding IP core from Global IP Core Sales listed on Semi IP Hub.

How should engineers evaluate this Channel Coding?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Channel Coding IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP