Vendor: VeriSyno Microelectronics Co., Ltd. Category: Single-Protocol PHY

HDMI 14 TX PHY

The HDMI Tx PHY is the physical layer of a single-link HDMI transmitter interface.

Contact Provider Request Datasheet

Overview

The HDMI Tx PHY is the physical layer of a single-link HDMI transmitter interface. The HDMI Tx PHY comprises three-line drivers for data transmission and an additional line driver for clock transmission. The HDMI Tx PHY is designed to perform the serialization and transmission of video data and control information through an HDMI interface. The HDMI Tx PHY interfaces with an HDMI Tx link controller through a common graphic controller interface supporting 30-,60- or 120-bit data transfers. A clock line driver is used for reference clock transmission.

Key features

  • ? Support for 4k x 2k and 3D video formats
  • ? Support for up to 16-bit Deep Color modes
  • ? Link controller flexible interface with 30-,60-or 120-bit SDR data access
  • ? Up to 18 Gbps aggregate bandwidth
  • ? Support for power collapsing
  • ? Driver with features for extra-long cables
  • ? Pre-emphasis enable
  • ? Slope boosting
  • ? Programmable source terminations
  • ? HPD input analog comparator
  • ? Rx sensing
  • ? 5-V protection
  • ? 13.5–600 MHz input reference clock
  • ? 50% duty-cycle output clock
  • ? Embedded A/D converter and analog testbus for ATE testing
  • ? Built-in pattern generator
  • ? Small core area

What’s Included?

  • We offer high-speed interface IPs designed for 28~90nm fabrication processes in various foundries. We can also customize porting IPs for customers requiring 90~180nm fabrications and support more advanced processes as needed.

Specifications

Identity

Part Number
HDMI 14 TX PHY
Vendor
VeriSyno Microelectronics Co., Ltd.
Type
Silicon IP

Provider

VeriSyno Microelectronics Co., Ltd.
HQ: The People's Republic of China
VeriSyno Microelectronics Co., Ltd. is a national high-tech enterprise dedicated to the research and development of semiconductor IPs. The company’s main products include mixed-signal high-speed interface IPs such as USB, HDMI, DDR, MIPI, PCIe, SATA, and various analog IPs such as ADC, DAC, PLL, LVDS, as well as independently developed PSRAM interface IO solutions and vMAC series IPs. As one of the important semiconductor IP suppliers in China, in active collaboration with local foundries, VeriSyno has long been committed to the porting of those mature interface IPs to processes such as 22/28/40/55nm, to ensure secure and reliable supply of domestic IPs. The company’s diversified IP products have been widely used in industries such as industrial, medical, AI, and IoT. VeriSyno was established in September 2018 and is headquartered in Hefei, Anhui, with branch offices in Beijing, Shanghai, and Shenzhen.
Contact VeriSyno Microelectronics Co., Ltd.

Learn more about Single-Protocol PHY IP core

UFS Goes Mainstream

UniversalFlash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniPro as well as eMMC form factors to simplify adoption and development.

Design IP Faster: Introducing the C~ High-Level Language

In this paper, we introduce a new high-level, dataflow programming language called C~ (“C flow”) that further increases productivity by raising the level of abstraction from behavioral descriptions, while overcoming the limitations of C for hardware design. We present the syntax and semantics of this language, and the framework that provides hardware and software code generation. This paper illustrates the benefits of using C~ for hardware design of a IEEE 802.3 MAC, synthesized for FPGA and for 90nm CMOS technology.

Universal Flash Storage: Mobilize Your Data

Universal Flash Storage (UFS) was created for mobile applications and computer systems requiring high performance and low power consumption. These systems typically use embedded Flash based on the JEDEC standard eMMC. UFS was defined by JEDEC as the evolutionary replacement for eMMC offering significantly higher memory bandwidth. The standard builds on existing standards such as the SCSI command set, the MIPI Alliance M-PHY and UniProSM as well as eMMC form factors to simplify adoption and development.

Can MIPI and MDDI Co-Exist?

Since MIPI and MDDI standards both target interfaces to cameras and displays on mobile devices, are two separate standards really needed?

Frequently asked questions about Single-Protocol PHY IP

What is HDMI 14 TX PHY?

HDMI 14 TX PHY is a Single-Protocol PHY IP core from VeriSyno Microelectronics Co., Ltd. listed on Semi IP Hub.

How should engineers evaluate this Single-Protocol PHY?

Engineers should review the overview, key features, supported foundries and nodes, maturity, deliverables, and provider information before shortlisting this Single-Protocol PHY IP.

Can this semiconductor IP be compared with similar products?

Yes. Buyers can compare this product with similar semiconductor IP cores or IP families based on category, provider, process options, and structured technical specifications.

×
Semiconductor IP